Range Rover Evoque: Electrical Distribution & Electronic Feature Group
Land Rover Range Rover Evoque L538 (2011–2018) Service Manual / Electrical Distribution & Electronic Feature Group
- Module Communications Network
- Central Junction Box (CJB)
- Battery Junction Box (BJB) TD4 2.2L Diesel
- Battery Junction Box (BJB) GTDi 2.0L
- Communications Network - Overview, System Operation and Component Description
- Communications Network - Diagnosis and Testing
- Wiring Harnesses
- Wiring Harness - Description and Operation
- Engine Wiring Harness TD4 2.2L Diesel, Vehicles With: AWF21 6-Speed Automatic Transmission
- Engine Wiring Harness GTDi 2.0L Petrol
- Engine Wiring Harness TD4 2.2L Diesel, Vehicles With: M66 6-Speed Manual Transmission AWD/M66 6-Speed Manual Transmission FWD
- Anti-Theft - Active
- Anti-Theft - Passive
- Navigation System
- Multifunction Electronic Modules
READ NEXT:
Central Junction Box (CJB)
Removal
CAUTIONS:
If a new component is to be installed, the Land Rover approved diagnostic
equipment must be connected prior to
removal, the data must then be downloaded from it and the keys (remote
Battery Junction Box (BJB) TD4 2.2L
Diesel
Removal
NOTES:
Removal steps in this procedure may contain installation details.
Some variation in the illustrations may occur, but the essential information is
always correct.
All vehicles
1. Refer
SEE MORE:
Front Door Trim Panel
Removal
NOTE: Removal steps in this procedure may contain installation details.
All vehicles
1. Torque: 6 Nm
2. Torque: 6 Nm
3. Torque: 0.9 Nm
4. Torque: 1.3 Nm
5-door
5.
3-door
6.
All vehicles
7.
8.
9. NOTE: Do not disassemble further if the
component is removed for access only.
10.
11.
Engine oil specification
It is important that the correct oil specification
is used. Vehicles fitted with a diesel particulate
filter (DPF) must use the specified oils
otherwise significant engine damage will
occur. Specified oils ensure that the life of the
DPF is maximised.
When a new vehicle is sold into markets wh
© 2011-2025 Copyright www.rrevoque.org
