Range Rover Evoque: Air outlet layout and operations

■ Location of air outlets

The air outlets and air volume changes according to the selected air flow mode.

Using the air conditioning system and defogger

■ Adjusting the position of and opening and closing the air outlets

Front center

Using the air conditioning system and defogger

Direct air flow to the left or right, up or down

Front right-hand side

Using the air conditioning system and defogger

  1. Direct air flow to the left or right, up or down
  2. Open the vent
  3. Close the vent

Front left-hand side

Using the air conditioning system and defogger

  1. Direct air flow to the left or right, up or down
  2. Close the vent
  3. Open the vent

Rear

Using the air conditioning system and defogger

  1. Direct air flow to the left or right, up or down
  2. Turn the knob to open or close the vents

WARNING

■To prevent the windshield defogger from operating improperly

Do not place anything on the instrument panel which may cover the air outlets. Otherwise, air flow may be obstructed, preventing the windshield defoggers from defogging.

Using the air conditioning system and defogger

READ NEXT:

 Automatic air conditioning system

Air outlets are automatically selected and fan speed is automatically adjusted according to the set temperature setting. Also, the display and button positions will differ depending on the type of th

 Using automatic mode

1. Press the automatic mode switch. 2. Adjust the temperature setting. 3. To stop the operation, press the off switch. If the fan speed setting or air flow modes are operated, the automatic mode in

 Air outlet layout and operations

■ Location of air outlets The air outlets and air volume changes according to the selected air flow mode. ■ Adjusting the position of and opening and closing the air outlets Front center Direct

SEE MORE:

 Manual Transmission FWD

Component Location COMPONENT LOCATION Manual transmission Selector lever assembly Overview OVERVIEW The M66EH50 manual transmission is a 6 speed unit manufactured by Getrag-Ford in Cologne, Germany. The transmission is a highly compact 4 shaft design, incorporating the front final drive gear.

 Cleaning and protecting the vehicle interior

Perform cleaning in a manner appropriate to each component and its material. Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a cloth dampened with lukewarm water. If dirt cannot be removed, wipe it off with a soft cloth dampened with neut

© 2011-2023 Copyright www.rrevoque.org