Range Rover Evoque: Changing the engine switch positions

Driving procedures

  1. OFF ("LOCK" position)

The key can be removed. (The key can be removed only when the shift lever is in P.)

  1. ACC ("ACC" position)

Some electrical components such as the audio system can be used.

  1. ON ( "ON" position)

All electrical components can be used.

  1. START ( "START" position)

For starting the engine.

■Turning the key from ACC to OFF

1. Shift the shift lever to P.

2. Push in the key and turn it to OFF.

Driving procedures

■Key reminder function

A buzzer sounds if the driver's door is opened while the engine switch is in OFF or ACC to remind you to remove the key.


■Caution when driving

Do not turn the engine switch to OFF while driving. If, in an emergency, you must turn the engine off while the vehicle is moving, turn the engine switch only to ACC to stop the engine. An accident may result if the engine is stopped while driving.


■To prevent battery discharge

Do not leave the engine switch in ACC or ON for long periods of time without the engine running.


 Engine (ignition) switch (vehicles with a smart key system)

Performing the following operations when carrying the electronic key on your person starts the engine or changes engine switch modes. Starting the engine 1. Check that the parking brake is set. 2. C

 Stopping the engine

1. Stop the vehicle completely. 2. Set the parking brake, and shift the shift lever to P. Check the parking brake indicator is illuminated. Do not press the shift lever button after shifting the shi

 Changing engine switch modes

Modes can be changed by pressing the engine switch with brake pedal released. (The mode changes each time the switch is pressed.) OFF*1 The emergency flashers can be used. ACC*2 Some electrical


 Parts and accessories

The fitting of non-approved parts and accessories, or the carrying out of non-approved alterations or conversions, may be dangerous and could affect the safety of the vehicle and occupants and also invalidate the terms and conditions of the vehicle warranty. Land Rover will not accept any

 Front Stabilizer Bar Bushing

Removal NOTES: Some variation in the illustrations may occur, but the essential information is always correct. Removal steps in this procedure may contain installation details. 1. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle. 2. Remove the front wheels

© 2011-2023 Copyright www.rrevoque.org