Range Rover Evoque: Headlight aim

Vertical movement adjusting bolts

Do-it-yourself maintenance

  1. Adjustment bolt A
  2. Adjustment bolt B

Before checking the headlight aim

Adjusting the headlight aim

1. Using a Phillips-head screwdriver, turn bolt A in either direction.

Remember the turning direction and the number of turns.

Do-it-yourself maintenance

2. Turn bolt B the same number of turns and in the same direction as step 1.

If the headlight cannot be adjusted using this procedure, take the vehicle to your Toyota dealer to adjust the headlight aim.

Do-it-yourself maintenance

READ NEXT:

 Light bulbs

You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. F

 When trouble arises

 Essential information

SEE MORE:

 Connecting a device

Connecting a device 1. USB/iPod sockets. 2. 3.5 mm AUX socket. 3. Rear media USB/iPod socket. 4. Rear media AV sockets. Connect the device into the appropriate socket. Note: Use the cable supplied with your media device to connect to the USB socket. When an iPod is connected, playback will

 Surround camera system

The camera home page is accessed from the Home menu screen. If Cameras has not been set as a short cut, touch Extra features to display the list. With the engine running, the surround camera system uses 5 discretely placed cameras to assist in manoeuvring the vehicle. 1. Enlarge: To enlarg

© 2011-2023 Copyright www.rrevoque.org