Range Rover Evoque: Scheduled maintenance
Scheduled maintenance should be performed at specified intervals according to the maintenance schedule.
For details about maintenance items and schedules, refer to the "Scheduled Maintenance Guide" or "Owner's Manual Supplement".
■Resetting the message indicating maintenance is required
After the required maintenance is performed according to the maintenance schedule, please reset the message.
To reset the message, follow the procedure described below:
4.2-inch display
1. Press
.gif)
or
.gif)
of the meter
control switch to select
.gif)
.
2. Press
.gif)
or .gif)
to select "Vehicle
Settings" and then press and
hold
.
3. Press
or
to select
"Scheduled Maintenance" and
then press
.
4. Press
or
to select "Yes"
and then press
.
A message will be displayed on the multi-information display when the reset procedure has been completed.
7-inch display
1. Press
or
of the meter
control switch to select
.gif)
.
2. Press
or
to select "Vehicle
Settings" and then press and
hold
.
3. Press
or
to select
"Scheduled Maintenance" and
then press
.
4. Press
or
to select "Yes"
and then press
.
A message will be displayed on the multi-information display when the reset procedure has been completed.
Do-it-yourself maintenance
You can perform some maintenance procedures by yourself.
Please be aware that do-it-yourself maintenance may affect warranty coverage.
The use of Toyota repair manuals is recommended.
For details about warranty coverage, refer to the separate "Owner's Warranty Information Booklet" or "Owner's Manual Supplement".
READ NEXT:
General maintenance
Listed below are the general
maintenance items that
should be performed at the
intervals specified in the
"Owner's Warranty Information
Booklet" or "Owner's
Manual Supplement/Scheduled
Maintenance Gui
Emission inspection and maintenance
(I/M) programs
Some states have vehicle
emission inspection programs
which include OBD
(On Board Diagnostics)
checks. The OBD system
monitors the operation of
the emission control system.
If the malfunction indicato
SEE MORE:
Moving Vehicles Rear of the Vehicle
If a rear radar sensor detects a vehicle approaching from the right or
left at the rear of the vehicle and the system determines that the possibility
of a collision is high, this function will perform brake control to
reduce the likelihood of an impact with the approaching vehicle.
This function wi
Transmission GTDi 2.0L Petrol - Installation
Installation
NOTE: Some variation in the illustrations may occur, but the essential
information is always correct.
1. NOTE: This step is only required if previously removed.
Torque: 12 Nm
2. NOTE: This step is only required if previously removed.
3. CAUTION: Make sure that the seal is correctly
