Range Rover Evoque: Climate Control System
Land Rover Range Rover Evoque L538 (2011–2018) Service Manual / Climate Control System
- Climate Control System - General Information
- Climate Control
- Air Distribution and Filtering
- Heating and Ventilation
- Air Conditioning
- Control Components - Component Location
- Control Components - System Operation and Component Description
- Condenser GTDi 2.0L Petrol
- Blower Motor LHD AWD/LHD FWD
- Blower Motor RHD AWD/RHD FWD, RHD
- Climate Control Assembly
- Evaporator LHD
- Evaporator RHD
- Evaporator Temperature Sensor
- Condenser TD4 2.2L Diesel
- Heater Core and Evaporator Core Housing
- Defrost Vent/Register Blend Door Actuator LHD AWD/LHD FWD
- Desiccant Bag GTDi 2.0L Petrol
- Control Components FWD - Overview
- Auxiliary Climate Control
READ NEXT:
Climate Control System - General Information
Climate Control
Lubricants, Fluids, Sealers and Adhesives
General Specification
Capacities
Refrigerant oil adding capacities for replacment parts
NOTE: Rotate the A/C compressor shaft at least 6 t
Air Distribution and Filtering
Component Location
NOTE: Right Hand Drive (RHD) shown, Left Hand Drive (LHD) similar
COMPONENT LOCATION
Passenger face level/side window register
Side window vent
Face level duct
Side window duc
SEE MORE:
Smart key check
If the ignition is on or the engine is running and
there is no Smart Key inside the vehicle when
the last door is closed, the message Smart Key
Not Found Refer to Handbook will be displayed
in the message centre.
Ensure that the Smart Key is in the
vehicle before it is driven to another
loca
Replacement sensor
Should the sensor require replacing, it should
be carried out by a Dealer/Authorised Repairer.
A replacement sensor must be fitted to a
running wheel in order to be recognised by the
system. The vehicle needs to be stationary for
15 minutes during the sensor fitment before
the system is ready
© 2011-2025 Copyright www.rrevoque.org
