Range Rover Evoque: Climate Control System
Land Rover Range Rover Evoque L538 (2011–2018) Service Manual / Climate Control System
- Climate Control System - General Information
- Climate Control
- Air Distribution and Filtering
- Heating and Ventilation
- Air Conditioning
- Control Components - Component Location
- Control Components - System Operation and Component Description
- Condenser GTDi 2.0L Petrol
- Blower Motor LHD AWD/LHD FWD
- Blower Motor RHD AWD/RHD FWD, RHD
- Climate Control Assembly
- Evaporator LHD
- Evaporator RHD
- Evaporator Temperature Sensor
- Condenser TD4 2.2L Diesel
- Heater Core and Evaporator Core Housing
- Defrost Vent/Register Blend Door Actuator LHD AWD/LHD FWD
- Desiccant Bag GTDi 2.0L Petrol
- Control Components FWD - Overview
- Auxiliary Climate Control
READ NEXT:
Climate Control System - General Information
Climate Control
Lubricants, Fluids, Sealers and Adhesives
General Specification
Capacities
Refrigerant oil adding capacities for replacment parts
NOTE: Rotate the A/C compressor shaft at least 6 t
Air Distribution and Filtering
Component Location
NOTE: Right Hand Drive (RHD) shown, Left Hand Drive (LHD) similar
COMPONENT LOCATION
Passenger face level/side window register
Side window vent
Face level duct
Side window duc
SEE MORE:
Instrument Panel GTDi 2.0L Petrol
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. Make the SRS system safe.
Refer to: Standard Workshop Practices (100-00 General Information,
Description and Operation).
2. Disconnect the battery ground cable.
Refer to: Specifications (414-01 Battery, Mounting and
Instrument Panel Upper Section
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. Disconnect the battery ground cable.
Refer to: Specifications (414-01 Battery, Mounting and Cables,
Specifications).
2. Make the SRS system safe.
Refer to: Standard Workshop Practices (100-00 General Information,
De
© 2011-2026 Copyright www.rrevoque.org - 0.0051
