Range Rover Evoque: Body and Paint

READ NEXT:

 Front End Body Panels

Torque Specifications Fender Removal NOTE: Removal steps in this procedure may contain installation details. 1. Refer to: Front Bumper Cover (501-19 Bumpers, Removal and Installation). 2. WARNING: Ma

 Body Closures

 Liftgate Alignment, Front Door

Liftgate Alignment NOTE: Some variation in the illustrations may occur, but the essential information is always correct. 1. With the liftgate closed, check the alignment of the liftgate to the roof p

SEE MORE:

 Rear Disc Brake

General Specification Torque Specifications * New nuts/bolts must be installed Brake Pads Removal WARNING: Brake pads must be renewed in axle sets only. Failure to follow this instruction may result in braking efficiency being impaired. CAUTION: LH illustration shown, RH is similar. 1. Connect th

 Topping up the brake/clutch fluid

Brake fluid will damage painted surfaces. Soak up any spillage with an absorbent cloth immediately and wash the area with a mixture of car shampoo and water. Only use new fluid from an airtight container (fluid from open containers or fluid previously bled from the system, will have absor

© 2011-2026 Copyright www.rrevoque.org